Bin Shellac-base Interior And Spot Exterior Primer, Flat White, 1 Gal Bucket/pail, 2/carton

Looking for a "silver bullet" primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).

• Diluent/Solvent Ingredient(s) : Denatured Alcohol
• Paint Sub-Category : Primer, Shellac-Based
• Color(s) : White
• Binder/Vehicle Ingredient(s) : Shellac
• Product Biodegradability Indicator : N
• Volume Capacity : 1 gal
• Product Biodegradability in Days : 0
• Pre-Consumer Recycled Content Percent : 0%
• Application Temperature Range : 0º and 90ºF
• Global Product Type : Building/Construction Paints & Primers
• Ship Class Code : A
• Post-Consumer Recycled Content Percent : 0%
• Color Family : White
• Product Compostability Indicator : N
• Application Method : Brush
• Cure/Dry-Time Range : 20 min (Touch)
• Packaging Type : Bucket/Pail
• Disclaimer Statement : B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
• Age Recommendation : Ages 16 and Up
• Applicable Surface Material : Cement
• Maximum Coverage Area : 500 sq ft
• Footnote 1 : Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
• Recommended Level of Ventilation : Moderate
• Footnote 2 : Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
• Total Recycled Content Percent : 0%
• Intended Application Environment : Interior/Exterior
• Finish/Sheen : Flat

Dimensions & Weight

Weight:

21.59 LBS

Width:

7.00 Inches

Height:

8.00 Inches

Depth:

14.00 Inches

Detailed Specs

MPN:

320991CT

Ship Class Code:

A

Footnote 2:

Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils

Footnote 1:

Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils

Disclaimer Statement:

B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are

Total Recycled Content Percent:

0%

Post-Consumer Recycled Content Percent:

0%

Pre-Consumer Recycled Content Percent:

0%

Product Compostability Indicator:

N

Product Biodegradability in Days:

0

Product Biodegradability Indicator:

N

Age Recommendation:

Ages 16 and Up

Cure/Dry-Time Range:

20 min (Touch)

Maximum Coverage Area:

500 sq ft

Applicable Surface Material:

Cement

Application Temperature Range:

0º and 90ºF

Recommended Level of Ventilation:

Moderate

Application Method:

Brush

Diluent/Solvent Ingredient(s):

Denatured Alcohol

Binder/Vehicle Ingredient(s):

Shellac

Packaging Type:

Bucket/Pail

Volume Capacity:

1 gal

Color Family:

White

Color(s):

White

Finish/Sheen:

Flat

Intended Application Environment:

Interior/Exterior

Global Product Type:

Building/Construction Paints & Primers

Paint Sub-Category:

Primer, Shellac-Based